In our travels, we often times see some beautiful country and meet a lot of good hard-working people.  We always try and take plenty of pictures so we can remember the people and the places.   We at Dykon would like to share some of these pictures and experiences with you.  In a way, we can take you along with us in our travels.  

So grab your hard hats and work boots and we'll take you with us to Snowflake, Arizona where we worked inside the Abitibi Consolidated Papermill.

1. View of the entrance to the Abitibi Consolidated Papermill.
2. View of our work truck setting by foundation number 4.
3. View of piers 1 thru 4 from the third floor of the main plant office building. 
4. View of piers 1 thru 8 from the west just as the sun was coming up over the horizon.
5. Attaching our drilling attachment to a 763 Bobcat Skidloader.  
6. Laying out the blast holes that will be drilled into the reinforced concrete.
7. Piers 5 and 6 all ready to drill.
8. Piers 1 and 2 all ready to drill. 
9. Drilling the holes for the explosive charges.
10. Drilling the holes for the explosive charges.
11. Loading the blast holes.
12. Placing the steel shields around and on top of the number 5 pier.  It's ready for blasting.
13. Placing the steel shields around pier number 7.
14. Placing the steel blast shield over the top of pier number 7
15. Placing the steel blast shields around pier 4 to help control flyrock.
16. Placing the steel blast shields around pier 7
17. Removing the blast shield from around pier 5 after it was blasted.
18. Removing the blast shield from around pier 5 after it was blasted.
19. An overhead view of piers 1 thru 6 after they were blasted.
20. An overhead view of piers 1 thru 6 after they were blasted.
21. A picture of Alan Trujillo and Barney Herringshaw.
22. A picture of Tom Byers and Barney Herringshaw.
23. Our last view of the Abitibi Plant as we leave.